This guide will teach you to root the Lyf Water 1 smartphone. It also teaches how to install TWRP Recovery, a custom recovery that can be used in case something goes wrong with your default ROM and it’s difficult or impossible for you to fix the problem yourself.
The “how to root redmi note 5 without pc” is a guide that will help you know how to root your device and install TWRP Recovery.
If you possess a Lyf Water 1 smartphone and want to personalize it, you’ve come to the correct place.
The Lyf Water 1 (LS-5002) is one of those smartphones in India that offers a full-HD display for less than Rs. 8000. The display, which is an IPS panel with 441 ppi, NTSC color gamut, wide viewing angle, and Incell technology for extended battery backup, provides clear and sharp graphics. The phone has a fine-line lightweight unibody construction with a tempered glass back. The phone’s rear cover is scratch-resistant and gives it a stunning appearance. There is a 13 megapixel camera on the back and a 5 megapixel camera on the front, both of which are equipped with flash for shooting well-lit photographs even in the dark. Qualcomm Snapdragon 615 CPU, 2GB RAM, 16GB internal memory, and 64-bit octa-core processor power the phone. The 2600 mAh battery is claimed to last up to 64 hours of movie playing, 35 hours of audio playback, and more than 24 hours of 4G talktime.
If you’re an Android fanatic looking to root and install TWRP recovery on your device, you’ve come to the correct place. We’ll walk you through the process of installing TWRP and rooting Lyf Water 1 later in this post (LS-5002).
The TWRP features the material design, and attractive user interface (UI), and by following this guide you can install latest TWRP for Lyf Water 1 (LS-5002). You can download TWRP Recovery from the links provided in the pre-requisite section of this article. Kindly note that this is a <official/unofficial> TWRP recovery and is only for Lyf Water 1 (LS-5002) (Kindly confirm the model by going to Settings>About). The process given below is merely for rooting and installing TWRP on Lyf Water 1 (LS-5002), do not try out this method on any other device.
Rooting and flashing the TWRP is the most important step if you want to fully use the hardware of your Lyf Water 1 (LS-5002). In terms of customization, stock ROMs often have restricted and unsupported capabilities. You may install any Custom ROMs, Mods, Kernel, and Xposed, as well as many applications that need root access to run correctly, after you’ve rooted your smartphone and installed TWRP recovery.
TWRP Recovery: A Quick Overview and Benefits
TWRP (Team Win Recovery Project) is a community-driven open source project. Your device will be able to install any custom firmware, root it, use mod zip files for modifications, use Xposed Modules for customizable features, and perform one-click root and unroot operations after flashing the TWRP. Apart from that, it enables you to create a Full Nandroid Backup and restore it later, flash image files with a single click, remove bloatware, and overclock and underclock your device. After flashing any image file, TWRP can simply wipe Wipe, Cache, and Data to reflect the changes and correct minor cache issues.
Your Lyf Water 1 (LS-5002) phone must have the Unlocked bootloader in order to install TWRP. That implies you must first unlock the bootloader before rooting and customizing your smartphone.
Disclaimer: Although AndroidWeblog.com covers everything in a very tidy and processed way to ensure that our visitors receive precisely what they want, there are a small number of fundamental concerns that may develop as a result of the actions outlined here. As a result, it is in the user’s best interest to carefully follow the procedures in order to avoid any device malfunctions.
Without a doubt, rooting and flashing the Custom ROM firmware breaks your device’s warranty, and AndroidWeblog.com will not be held liable for the warranty void or your bricked smartphone.
Always double-check your model number, which should be:
You must confirm that you have read the disclaimer properly and that you agree to continue at your own risk before rooting your phone.
If your phone is not at least 70% charged, you may have issues when testing. Why take a chance when you can completely charge it?
It is a good practice to create a backup of your phone if you are planning to root it or install a Custom ROM. Make a cloud backup of all your media, including photographs, movies, and other files on your PC, as well as your contacts.
By navigating to Settings, Applications, and Developer settings, you must enable USB debugging.
Rooting Lyf Water 1 Downloads (LS-5002)
Download the Lyf drivers you’ll need.
TWRP Recovery for Lyf Water 1 (LS-5002) may be downloaded here:
TWRP Recuperation (Google Drive Link)
Chainfire’s SuperSU may be downloaded here.
Toolkit is available for download here.
Instructions for Flashing/Installing TWRP on Lyf Water 1 (LS-5002)
Step 1: I assume that you have already enabled the USB debugging, as mentioned in prerequisite section. But if you don’t know how to do the same, then just navigate to the Settings>About Phone> and then locate the build number and tap on it for 7-8 times. This will enable the ‘Developer Options’. After enabling the ‘Developer Option’, simply tap on same and enable ‘USB Debugging’ under the Debugging option.
Step 2: Now, extract the TWRP and Toolkit packages that you downloaded previously. After unpacking the compressed bundle, you’ll find a variety of files, including Fastboot files.
Step 3: At this point, all you have to do is keep it basic. Locate and copy the recovery.img file from the extracted zipped archive folder to the toolkit folder. The reason for this is that toolkit will be able to access files in its own folder.
Step 4: Now just power off/shutdown the device, then press & hold the Volume Down+Power keys simultaneously to boot it into Fastboot mode.
Step 5: Next, go to the toolkit folder and look for the file ‘Start.bat,’ which is a batch script that is written to accomplish the goal on a regular basis.
Step 6: You will be greeted by a command window with many choices. Simply choose option ‘A’ from the drop-down menu.
Step 7: Connect the Lyf Water 1 (LS-5002) device to the PC now. As previously said, the toolkit script will root the device once it is attached. Simply connect the gadget to the computer using the USB cord.
Step 8: As you can see, the flashing process began as soon as the device was attached. Simply reboot the device after the procedure is completed. TWRP has now been successfully installed on your device.
Step 9: Check to see whether TWRP is installed on your smartphone. To enter recovery mode, just switch off the device and press the Volume Up+Power Button simultaneously. To boot into fastboot mode, click the Volume Down+Hold button, then the Volume Down+Up button to explore the screen, pick Recovery, and then hit the Power button to reboot the device.
Install SuperSU 1 (LS-5002)/ Root Lyf Water 1 (LS-5002)
Make sure you’ve got SuperSU installed (link in pre-requisite section of this article). Then go through the instructions.
Step 1: Move the downloaded SuperSU.zip file to your Lyf Water 1 (LS-5002) smartphone’s internal storage / SD card.
Step 2: Now just enter the recovery mode. You may backup the Stock ROM using the TWRP interface if you want to. However, I would advise you to make a backup of the Stock ROM. Because you can always flash the Stock ROM if the operation fails.
Step 3: Tap ‘Install,’ then scroll to ‘SuperSU.zip’ and swipe to confirm flashing (located at the bottom of the screen). The SuperSU flashing procedure has begun and will take a few seconds to finish.
Congratulations, you’ve now rooted the Lyf Water 1 (LS-5002) and flashed the TWRP recovery. You may now install the Xposed Framework and personalize your smartphone to your liking. If you want to double-check, you may use the Root Checker app to download and check the Root Status.