Windows 10 Won’t Sleep? Here is how to Fix it

Windows 10 users are frustrated with being unable to put their system in sleep mode, but there is a fix. We’ve compiled this guide on how you can get your computer back into the land of dreams and lullabies.

The “computer won’t go to sleep windows 11” is a problem that some Windows 10 users have been experiencing. Here are some solutions on how to fix it.

Windows 10 has been Microsoft’s cherished operating system for quite some time, until its next major product, Windows 11, arrived, yet many people are still staying with it rather than switching to the new one. However, some customers have reported that they are unable to put their computers into sleep mode. As a result, if your Windows 10 computer refuses to sleep, you’ve come to the proper spot.

Windows 10 Isn’t Going To Sleep

Why Won’t Windows 10 Go To Sleep Mode?

After conducting a thorough investigation into the matter, we came to the conclusion that there must be some extremely strong causes for the problem’s occurrence, and based on solid evidence, we linked it to the following significant factors.

• Problems with Power Configuration: It’s conceivable that your computer’s power configuration settings prevent it from sleeping automatically. As a result, we recommend rearranging them as shown below.
• Peripherals: The peripherals that are attached to the PC might sometimes hinder it from going to sleep. As a result, disconnecting them as described in the remedies below may assist in resolving the problem.
• Background Apps: Apps or services operating in the background of your computer may prevent it from sleeping by keeping it active or generating a wake-up call. You may correct this by following the steps shown below.

You may now go on to applying the changes that will get you out of this bind now that you understand why your OS is refusing to sleep.

Automatically Resolve PC Problems

If you want to have your PC problems instantly corrected as well as diagnose, list, and correct any registry flaws, we suggest utilizing the Restoro Repair Tool, which can handle all of this with just one click. Trustpilot has given it a 5-star rating, so you don’t have to be concerned.

How to Fix the Windows 10 Isn’t Going To Sleep Issue:

Solution 1: Checked Peripherals Attached

An linked device such as a mouse, keyboard, USB stick, headset, or speaker may sometimes prevent the computer from going to sleep owing to hardware connection issues or a general failure. This isn’t extremely often, but it has happened before. As a first check, we suggest unplugging all connected devices from your computer and putting it to sleep. You may do this by disconnecting one item at a time and then testing whether the Windows 10 not going to sleep mode problem is resolved.

Attached Peripherals Inspection

If it is, it implies you’ve found the culprit; if it isn’t, it’s likely that the device isn’t the source of the problem, and you may go on to other devices. You may go to the following step after you’ve confirmed that an associated device isn’t the source of the problem.

Solution 2: Adjusting Sleep Preferences

You may be unable to put the computer to sleep because the sleep mode has been disengaged from the main settings. As a result, we recommend that you follow the instructions below.

1. To access the settings, use the “Windows + I” keys on your keyboard.
2. From here, click on the “System” option to launch into the hardware settings screen. Clicking on the “System” option
3. Once on this screen, try to look for the “Power & Sleep” button from the left and on the right, you should see some settings under the “Sleep” heading.
4. Click on the “On battery power, PC goes to sleep after” and make sure that you have selected a certain amount of time and that the value is not set to “NEVER”. Selecting Appropriate Sleep Time
5. Also, make sure the “When plugged in, PC goes to sleep after” selection is selected.
6. Then, in the upper right corner, under the “Related Settings” header, click on “Additional Plan Settings.”
7. From there, select the “Change Plan Settings” button and then select the “Change Advanced Power Settings” option. Selecting the “Change Advanced Power Settings” option
8. Now, in the new popup window, scroll down a bit until you see the “Sleep” setting, click on it to initiate the dropdown and make sure that the “On Battery” and the “Plugged In:” values match the ones that we configured in the settings in steps 4 and 5. Configuring Sleep Setting
9. If they don’t, click on them and make the necessary changes to meet our needs.
10. After that, click the “Apply” button, followed by the “OK” button to close the window.

Solution 3: Turn off your screen saver.

It is entirely possible that the Windows 10 Isn’t Going To Sleep automatically issue is being triggered because you have enabled the screen saver which can prevent the sleep sequence from initiating. Therefore, we recommend you go through the steps below to fix it.

1. Press “Windows + S” to launch into the Window search bar, type in “Change Screen Saver” and click on the first option to launch into the screen saver configuration window. Selecting the “Change Screen Saver” option that shows up
2. From here, pick the “None” option from the “Screen Saver” selection.
3. To save your changes, click “Apply” and then “OK.”
4. Check to see if Windows 10 Isn’t Going To Sleep issue has been fixed.

Disabling Hybrid Mode on the PC (solution 4)

When Hybrid Sleep mode is activated on your PC, it might sometimes result in your Windows 10 PC not going to sleep. As a result, we recommend that you do the following measures.

1. To open the Run prompt, use “Windows + R.”
2. From here, type in “Powercfg.cpl” and press “Enter” to launch into the power configuration panel. Typing in “Powercfg.cpl” in the Run prompt
3. After that, choose “Change Advanced Power Settings” from the “Change Plan Settings” menu.
4. Click on the “Sleep” dropdown and then click on the “Allow Hybrid Sleep” dropdown. Disabling Hybrid Sleep
5. Make sure the “Plugged in:” and “On Battery:” options are both set to “OFF” from here. If you have any other options, make sure they are “OFF” for the “Allow Hybrid Sleep” option as well.
6. Now that you have turned off Hybrid sleep, check and make sure that you have fixed the Windows 10 Isn’t Going To Sleep issue and that it is now going to the sleep mode normally.

Reconfiguring Multimedia Power Options is the fifth solution.

1. To open the Run prompt, click the “Windows + R” keys on your keyboard.
2. Type in “Powercfg.cpl” and press “Enter” to launch into the power configuration window. From here, select Typing in “Powercfg.cpl” in the Run prompt

   pick the “Change Plan Settings” option from the following screen, then the “Change Advanced Power Settings” option.

3. After that, select the “Multimedia Settings” option in the next pop-up window, and then make sure you pick the “When Sharing Media” dropdown again.
4. Select the “Allow the Computer to Sleep” option from the list and click on the “Apply” button. Changing Multimedia Settings
5. Select “OK” to close the window and verify that Windows 10 is sleeping appropriately now.

Monitoring Power Requests is the sixth solution.

Fortunately for us, the computer retains power request records from each program so we can figure out how much power is being used. We can keep an eye on this log to see whether a program is using power immediately before the computer goes to sleep, and if so, we can stop it once we’re aware of it. As a result:

1. To open the run prompt, use the “Windows + R” keys on your keyboard.
2. From here, type in “cmd” and press “Shift + CTRL + Enter” to launch in with administrative privileges. Typing in cmd
3. To run the command, enter “Powercfg /requests” and hit “Enter.”
4. After that, your console will show you which programs are presently using power; if you discover any that you don’t recognize or that aren’t intended to be operating, you may deactivate them and see if the Windows 10 PC won’t sleep automatically problem is resolved.

Troubleshoot for Power Issues (solution 7)

Windows 10 comes with a built-in troubleshooter that can help you figure out if there are any possible problems in your system. That may be run in the hopes of resolving the problem. As a result:

Automatically Resolve PC Problems

If you want to have your PC problems instantly corrected as well as diagnose, list, and correct any registry flaws, we suggest utilizing the Restoro Repair Tool, which can handle all of this with just one click. Trustpilot has given it a 5-star rating, so you don’t have to be concerned.

1. Press “Windows + I” to launch into the settings, click on the “Update & Security” option and select the “Troubleshoot” button from the left side.
2. Now, scroll down until you find the “Power” option, click on it and select the “Run the Troubleshooter” button. Tapping on Run the Troubleshooter Option
3. Make sure you finish the troubleshooting process by following the on-screen directions and checking to see whether your problem has been resolved.

Solution #8: Make sure your drivers are up to current.

1. On your computer, download and install the Driver Easy program.
2. Run the program when it has been installed and choose the Scan option.
3. When the scan is complete, it will notify you of any missing software updates, and you can opt to have them installed automatically by the program or manually by downloading and installing them for free.
4. Check to see whether Windows 10 sleeps properly after replacing your old drivers.

Solution 9: Turn off the Fast Startup feature.

The rapid starting feature of Windows 10 has been known to malfunction, preventing the computer from switching to sleep mode. As a result, we recommend temporarily disabling the Fast Startup option and seeing whether this resolves your problem. As a result:

1. From your keyboard, To open the Run prompt, use “Windows + R.”
2. Now, type in “Powercfg.cpl” and press “Enter” to launch into the power configuration window. Typing in “powercfg.cpl”
3. From the left-hand pane, choose “Choose what the power buttons do.”
4. To make the options below editable, select the “Change settings that are currently inaccessible” button at the top.
5. Make sure that the “Turn on Fast Startup” checkbox is not checked. Turning off Fast Startup
6. Save your changes before closing the window.
7. Check to determine whether your computer goes to sleep correctly after restarting it.

Disabling Wake Timers is the tenth solution.

1. To open the power configuration panel, use “Windows + R” to open the Run prompt and input “Powercfg.cpl.”
2. From there, click on the “Change Plan Settings” option in front of your selected plan and then select the “Change Advanced Power Settings” button. Select Change Advanced Power Settings
3. Select “Sleep” from the dropdown menu, then “Allow Wake Timers” from the dropdown menu.
4. Click on the “Setting:” option here and make sure that it is set to “Disabled”. Reconfiguring Wake Timers setting

   Note: If that doesn’t work, try changing it to “Important Wake Timers Only,” which has worked for some people.

5. Check to see if doing so has fixed the Windows 10 Isn’t Going To Sleep issue on your PC.

Solution 11: Preventing Devices from Getting the PC Up and Running

1. Type “devmgmt.msc” into the “Windows + R” keys on your keyboard.
2. To open the device management window, press “Enter” and expand the “Network Adapters” menu.
3. Select “Properties” from the list of options when right-clicking on the network adapter that your device is utilizing.
4. On the new window, click on the “Power Management” tab and from there, make sure to uncheck the “Allow this device to wake the computer” option. Allow the computer to turn off this device to save power.

   If this doesn’t work, try checking the “Only allow a magic packet to wake the Computer” option.

5. Click “OK” to close the window and check to see whether the problem has been resolved.
6. If the problem persists, expand the “Mice” section and repeat the process for each device mentioned there. If the problem persists, try the same procedure using your keyboard.

Note: Disconnecting any controllers you may have attached to the PC may also be beneficial.

Solution 12: Make a Windows update

1. To access the settings, press “Windows + I.”
2. From there, click on the “Update & Security” option and select the “Windows Update” section from the left side.
3. Now, click on the “Check for Updates” button and wait for the computer to check for any available updates. Check For Updates
4. To avoid the usage of outdated Windows, be sure to apply these updates on your PC.
5. Check to see if this resolves the problem.

Solution 13: Cleaning Up Your Bootstraps

A clean boot is simply a stripped-down version of your operating system that loads up without any third-party programs or services. This aids in determining if a problem is being caused by third-party applications, and you can effectively diagnose which app is causing the problem by loading specific services and seeing which service the issue returns after loading. As a result:

1. Press “Windows + R” to launch into the Run prompt, type in “msconfig” and press “Enter” to launch into the Microsoft configuration panel. Typing in “Msconfig”
2. From here, pick the “Safe Boot” box under the “Boot” option.
3. After that, click on the “Services” window from the top and make sure that you uncheck the “Hide All Microsoft Services” option. Hide All Microsoft Services
4. To deactivate all of these services and restart your machine in the clean boot state, click the “Disable All” option.
5. Use this mode to determine which service or program is causing the problem for you, and then deactivate or repair it permanently.

Note that Malwarebytes is one of the applications that has been linked to this problem.

The “windows 10 won’t sleep 2021” is a problem that many Windows users have faced. The solution to the issue, is to use the power options in your computer.

Related Tags

• windows 10 won’t sleep automatically
• pc won’t sleep manually
• how do i fix my computer not sleeping
• windows 10 won’t sleep 2020
• what is keeping my computer from going to sleep windows 10?